Using the PGDAD Module as a Music Source

Additional Feature Information
Background Music
Music on Hold
Programming for this Feature
Programming Background Music
Background Music Operation
PGDAD Module Jumper Settings
Programming 2PGDAD Module Station Ports
Connecting and Programming 2PGDAD Module Audio Ports

Setting up a PGDAD Module Audio Port as a Music Source

1. Set up the PGDAD Module jumpers and program the ports.

  1. To set the jumpers, see PGDAD Module Jumper Settings.
    Before plugging in the 2PGDAD Module, make sure the channel you are using is set for Audio Input/Output.
    For quickest installation, don't plug the 2PGDAD module into it's digit station port until after programming is complete.
  2. To set the basic programming for the 2PGDAD Module, see Programming 2PGDAD Module Station Ports.
    Program the 2PGDAD Module.
    For quickest installation, don't plug the 2PGDAD module into it's digit station port until after programming is complete.
  3. To connect and program the 2PGDAD Module audio ports, see Connecting and Programming 2PGDAD Module Audio Ports.
    Connect a compatible music source into the selected 2PGDAD Module audio port.
    For quickest installation, don't plug the 2PGDAD module into it's digit station port until after programming is complete.

2. Plug the 2PGDAD Module into its assigned digital station (ESIU) port.

  1. Turn on the music source connected to the 2PGDAD Module.
  2. Adjust the music source and system gains as required.