Flexible Numbering Plan

Change the digits users dial for co-workers and other features.
Programming for this Feature
Programming Flexible Numbering Plan

Description

The system’s Flexible Numbering Plan allows you to change the digits users dial to reach the attendant, other co-worker’s, outside lines, UCD Groups, and Ring Groups. The following chart shows the areas of the system number plan you can change.
For this feature: You can change the digits a user dials to: These digits are normally:
Attendant Position Reach the system operator(s) 0 or 01-04
Central Office Calls, Placing Access a Line Group 90-98
Direct Line Access Directly access a line 101-164
Extension Hunting Reach a UCD Group master number 700-707
Group Ring Reach a Ring Group master number 600-607
Intercom Call a co-worker over the Intercom 300-427

Conditions and Defaults

Conditions


  • None.

Default Setting


  • See the table above.

Other Related Features

Features


  • Attendant Position
    • Change the digits users dial to reach the system operators (normally 0 or 01-04).
  • Central Office Calls, Placing
    • Change the digits users dial to access a Line Group for an outside call (normally 90-98).
  • Direct Line Access
    • Change the digits users dial to directly access an outside line (normally 101-164).
  • Extension Hunting
    • Change the digits required to reach a UCD Group master number.
  • Group Ring
    • Change the digits required to reach a Ring Group master number.
  • Intercom
    • Change the digits users dial to reach co-worker’s over the Intercom (normally 300-427).

IntraMail Features


  • None.