Using the PGDAD Module with an Analog Door Box
Additional Feature Information
Door Box
Programming for this Feature
Programming Analog Door Boxes
Using DSX-40 Built-In Door Box Ports
Setting up a PGDAD Module for Analog Door Boxes
1. Set up the PGDAD Module jumpers and program the ports.
To set the jumpers, see
PGDAD Module Jumper Settings
.
Before plugging in the 2PGDAD Module, make sure the channel you are using is set for Door Box.
For quickest installation, don't plug the 2PGDAD module into it's digit station port until
after
programming is complete.
To set the basic programming for the 2PGDAD Module, see
Programming 2PGDAD Module Station Ports
.
Program the 2PGDAD Module.
For quickest installation, don't plug the 2PGDAD module into it's digit station port until
after
programming is complete.
To connect and program the 2PGDAD Module for Door Boxes, see
PGDAD Module Door Box and Relay Connections
.
Wire the Analog Door Box to the selected 2PGDAD Module door box connections.
For quickest installation, don't plug the 2PGDAD module into it's digit station port until
after
programming is complete.
2. Plug the 2PGDAD Module into its assigned digital station (ESIU) port.