Programming Line Overflow

Additional Feature Information
Direct Inward Dialing
Direct Inward Line
Group Ring
Key Ring
Programming for this Feature
Programming DID Intercept and Camp-On
Programming Line Termination
Programming Outside Line Type, Access, and Ringing

Setting Up Line Overflow

1. Set up day mode Line Overflow.

  1. 3112-02: Enable Day Overflow [Lines: Config: Options: Termination (3112): Day Termination: Overflow Destination]
    Use this option to enable or disable day mode Line Overflow.
    If disabled, an unanswered call during the day diverts to Key Ring without overflow (unless intercepted by other features).
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  2. 3112-03: Day Overflow Destination [Lines: Config: Options: Termination (3112): Day Termination: Overflow Destination]
    If day overflow is enabled, use this option to set the day overflow destination.
    Option Description
    Digits The destination can be:
    • An extension. [Default] = 300.
    • A UCD Group master number.
    • The voice mail master number.
    • A Ring Group master number
    • Key Ring (entered by pressing Clear).
  3. 1601-01: Line No Answer Timer [System: Timers: Features: Incoming (1601): Line No Answer]
    When day overflow is enabled, this timer determines how long the call rings its initial destination before diverting to the overflow destination.
    When day overflow is disabled, this timer determines how long the call rings its initial destination before diverting to Key Ring.
    This timer also applies to Direct Inward Lines for a Ring Group. For DILs to an extension, use 1601-02: DIL No Answer Timer [System: Timers: Features: Incoming (1601): DIL No Answer] instead. For DILs to a UCD Group, see Extension Hunting.
    Option Description
    1-9999 Seconds. [Default] = 15 seconds.
  4. 1601-02: DIL No Answer Timer [System: Timers: Features: Incoming (1601): DIL No Answer]
    When day overflow is enabled for a DIL to an extension, this timer determines how long the call rings the DIL destination before diverting to the overflow destination.
    When day overflow is disabled for a DIL to an extension, the call diverts to Key Ring after this interval.
    This interval also sets how long any call rings its overflow destination before diverting to Key Ring.
    Option Description
    1-9999 Seconds. [Default] = 15 seconds.

1. Set up night mode Line Overflow.

  1. 3112-05: Enable Night Overflow [Lines: Config: Options: Termination (3112): Day Termination: Activate Overflow]
    Use this option to enable or disable night mode Line Overflow.
    If disabled, an unanswered call at night diverts to Key Ring without overflow (unless intercepted by other features).
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  2. 3112-06: Night Overflow Destination [Lines: Config: Options: Termination (3112): Day Termination: Activate Overflow]
    If night overflow is enabled, use this option to set the night overflow destination.
    Option Description
    Digits The destination can be:
    • An extension. [Default] = 300.
    • A UCD Group master number.
    • The voice mail master number.
    • A Ring Group master number
    • Key Ring (entered by pressing Clear).
    Key Ring [Default] Entered by pressing Clear.
  3. 1601-01: Line No Answer Timer [System: Timers: Features: Incoming (1601): Line No Answer]
    When night overflow is enabled, this timer determines how long the call rings its initial destination before diverting to the overflow destination.
    When night overflow is disabled, this timer determines how long the call rings its initial destination before diverting to Key Ring.
    This timer also applies to Direct Inward Lines for a Ring Group. For DILs to an extension, use 1601-02: DIL No Answer Timer [System: Timers: Features: Incoming (1601): DIL No Answer] instead. For DILs to a UCD Group, see Extension Hunting.
    Option Description
    1-9999 Seconds. [Default] = 15 seconds.
  4. 1601-02: DIL No Answer Timer [System: Timers: Features: Incoming (1601): DIL No Answer]
    When night overflow is enabled for a DIL to an extension, this timer determines how long the call rings the DIL destination before diverting to the overflow destination.
    When night overflow is disabled for a DIL to an extension, the call diverts to Key Ring after this interval.
    This interval also sets how long any call rings its overflow destination before diverting to Key Ring.
    Option Description
    1-9999 Seconds. [Default] = 15 seconds.