Programming DID Intercept and Camp-On

Additional Feature Information
Direct Inward Dialing
Programming for this Feature
Programming Line Overflow

Setting Up DID Station Intercept and DID Camp-On

1. Set up DID Station Intercept at an extension.

  1. 2115-02: DID Station Intercept Type Stations: Config: Options: Hunt/Overflow (2115): DID Intercept Type]
    Use this option to set the condition that will cause DID Station Intercept to occur (e.g., station busy, unanswered, etc.).
    Option Description
    0 [Default] None.
    1 Busy/DND
    • DID Intercept occurs when the extension is busy or in Do Not Disturb.
    2 Ring No Answer
    • DID Intercept occurs when the extension is unanswered.
    3 Busy/DND and Ring No Answer
    • DID Intercept occurs when the extension is busy, in Do Not Disturb, or is unanswered.
  2. 2115-02: DID Station Intercept Destination Stations: Config: Options: Hunt/Overflow (2115): DID Intercept Destination]
    Use this option to assign the extension's DID Station Intercept destination. This is the destination to which the call routes after the initial destination is unanswered.
    Option Description
    No (0) The destination can be:
    • An extension. [Default] = 300.
    • A UCD Group master number.
    • The voice mail master number.
    • A Ring Group master number
  3. 1601-02: DIL No Answer Timer [System: Timers: Features: Incoming (1601): DIL No Answer]
    When DID Station Intercept enabled, this timer determines how long the call rings its initial destination before diverting to the intercept destination.
    Option Description
    0 Disabled.
    1-9999 Seconds. [Default] = 15 seconds.

2. Set up DID Camp-On.

  1. 1401-09: Receive DID Camp-On [System: Class of Service: Features: Features (1401): DID Camp On]
    This option enables and disables the ability of a DID call to Camp-On to an extension when it is unavailable.
    Option Description
    No (0) Disabled.
    Yes (1) [Default] Enabled.
  2. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    Assign Class of Service to extensions.
    Option Description


    1-15
                                                


    Class of Service level 1-15.
    [Default] for extension 300 = 1.
    [Default] for all other extensions = 2.