Programming Tandem Calls / Unsupervised Conference

Additional Feature Information
Tandem Calls / Unsupervised Conference

Setting Up the Tandem Calls Options

Enable Tandem Calls for lines and extensions.

  1. 3103-04: Tandem Calls [Lines: Config: Setup: Settings (3103): Tandem Calls]
    Use this option to enable Tandem Calls for the line.
    • This allows the line to be included in a Tandem Call.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  2. 1411-05: Unsupervised Conference [System: Class of Service: Lines: Lines (1411): Unsupervised Conference]
    Enable this Class of Service option if the extension should be able to set up a Tandem Call.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  3. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    Assign Class of Service to extensions.
    Option Description


    1-15
                                        


    Class of Service level 1-15.
    [Default] for extension 300 = 1.
    [Default] for all other extensions = 2.