Programming Store and Forward
Additional Feature Information
Central Office Calls, Placing
Programming for this Feature
Programming Outside Line Type, Access, and Ringing
Programming Line and Loop Keys
Programming Line Transmit and Receive Gain
Programming Line Group Access
Programming Line Dial-Up
Changing the Direct Line Access Numbering
Store and Forward Setup
Setting up and Understanding Store and Forward
3111-05: Store and Forward [Lines: Config: Options: Features (3111): Store & Forward]
Use this option to enable Store and Forward.
Option
Description
No (0)
[Default] Disabled.
Yes (1)
Enabled.
When Store and Forward is outdialing on DTMF lines, it uses the following.
1111-03: Speed Dial DTMF Tone On [System: Config: Tones: DTMF (1111): Speed Dial DTMF Tone On]
.
1104-04: Primary Domain Name Server [System: Config: Communication: Ethernet (1104): DNS #1]
.
When Store and Forward is outdialing on analog Dial Pulse lines, it uses the following.
1612-01: DP Break Timer [System: Timers: CO Interface Card: Outgoing (1612): Break Time]
.
1612-02: DP Make Timer [System: Timers: CO Interface Card: Outgoing (1612): Make Time]
.
1612-03: DP Interdigit Timer [System: Timers: CO Interface Card: Outgoing (1612): Interdigit Time]
.
When Store and Forward is outdialing on T1 Dial Pulse lines, it uses the following.
1632-01: Transmit Dial Pulse Break Timer [System: Timers: T1 Card: Outgoing (1632): Tx Break Time]
.
1632-02: Transmit Dial Pulse Make Timer [System: Timers: T1 Card: Outgoing (1632): Tx Make Time]
.
1632-03: Transmit Dial Pulse Interdigit Timer [System: Timers: T1 Card: Outgoing (1632): Tx Interdigit]
.
The setting of the following timer determines the interval the system waits, after the user has dialed their last digit, before dialing the call on the selected line.
1602-01: Interdigit Timer [System: Timers: Features: Outgoing (1602): Interdigit Time]
.