Programming Forced Account Codes

Programming for this Feature
Programming Basics
Programming Verified Account Codes
Programming Example 1: Restrict 900 and 1 + 900
Programming Example 2: Allow 800 and 1 + 800

Setting Up Forced Account Codes

1. Should an extension have Forced Account Codes enforced?

  1. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    - Be sure to check the extension's Class of Service level.
    Option Description
    1-15 These are the available extension Class of Service levels.
    1 [Default] For extension 300 only.
    2 [Default] For all other extensions.
  2. 1412-04: Forced Account Codes [System: Class of Service: Toll Restriction: Toll Restriction (1412): Forced Account Code]
    - This option turns Forced Account Codes on and off in station Class of Service.
    Option Description
    0 (No) [Default] Disable Forced Account Codes in an extension's Class of Service.
    1 (Yes) Enable Forced Account Codes in an extension's Class of Service.

2. Should an extension have Forced Account Codes only for toll calls?

  1. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    - Be sure to check the extension's Class of Service level.
    Option Description
    1-15 There are 15 Class of Service levels.
    1 [Default] For extension 300 only.
    2 [Default] For all other extensions.
  2. 1412-06: Account Codes for Toll Calls Only [System: Class of Service: Toll Restriction: Toll Restriction (1412): Forced (Toll Only) Account Code]
    - Disabling this option (0) enforces Forced Account Codes for all outside calls.
    Option Description
    0 (No) [Default] Disable Forced Account Codes only for toll calls.
    1 (Yes) Enable Forced Account Codes only for toll calls.
  3. 1551-04: Account Code Toll Restriction Level [System: Options: Setup: Account Codes (1551): Toll Level]
    - Enter the Toll Level the system will use to differentiate toll calls from local calls.
    Option Description
    0 (No) [Default] Toll calls are any calls the user dials that begin with 0 or 1
    1-7 (Yes) The system uses the toll level options programmed in 3501-01: Toll Restriction Country Type See the Tool Bar for that level to determine if the call is local or toll.

3. Should certain lines never require users to enter a Forced Account Code?