Programming Forced Line Disconnect

Additional Feature Information
Forced Line Disconnect

Setting Up Forced Line Disconnect

Forced Line Disconnect Setup.

  1. 1402-01: Forced Line Disconnect [System: Class of Service: Stations: Stations (1402): Forced Disconnect]
    This option lets you enable Forced Line Disconnect for an extension.
    Option Description
    No (0) Disabled. [Default] for COS 2-15.
    Yes (1) Enabled. [Default] for COS 1.
  2. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    Assign Class of Service to extensions.
    Option Description


    1-15
                                        


    Class of Service level 1-15.
    [Default] for extension 300 = 1.
    [Default] for all other extensions = 2.

  3. 2131-[01-64]: Line Access Stations: Config: Line Access: Line Access (2131): Line Access]
    Make sure the extension has outgoing (option 2) or full (option 3) access to the lines it should be able to disconnect.
    Option Description
    0 No access.
    1 Incoming access only.
    2 Outgoing access only.
    3 [Default] Full access.