Programming Call Waiting / Camp On

Additional Feature Information
Call Waiting / Camp-On
Callback

Setting up the Call Waiting / Camp On Options

1. Set the options for sending Camp-On tones to a co-worker.

  1. 1512-02: Call Waiting Tones [System: Options: Setup: Calls (1512): Call Waiting (Camp On) Tone]
    In order for an extension to send or receive Camp-On tones, you must first enable the tones system-wide.
    Option Description
    No (0) Disabled.
    Yes (1) [Default] Enabled.
  2. 1402-03: Camp-On to Busy Extension [System: Class of Service: Stations: Stations (1402): Camp On Busy Station]
    Enable this Class of Service option if the extension should be able to send Camp-On tones to a co-worker.
    If the receiving extension has Camp-On tones blocked, the tones won't go through.
    This options has no effect on the operation of Callback.
    Option Description
    No (0) Disabled.
    Yes (1) [Default] Enabled.
  3. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    Assign Class of Service to extensions.
    Option Description


    1-15
                                      


    Class of Service level 1-15.
    [Default] for extension 300 = 1.
    [Default] for all other extensions = 2.

2. Set the options for receiving Camp-On tones from a co-worker.

  1. 1401-03: Privacy [System: Class of Service: Features: Features (1401): Privacy]
    An extension must have privacy disabled in order to receive Camp-On tones from a co-worker.
    Use this option to enable or disable Privacy in an extension's Class of Service.
    Option Description
    No (0) [Default] Disabled.
    Yes (1) Enabled.
  2. 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service]
    Assign Class of Service to extensions.
    Option Description


    1-15
                                        


    Class of Service level 1-15.
    [Default] for extension 300 = 1.
    [Default] for all other extensions = 2.
  3. 2116-01: Off Hook Signaling for Incoming Calls Stations: Config: Options: Off Hook Signal (2116): OHS Intercom]
    This option allows or blocks Camp-On tones from an incoming Intercom call.
    The receiving extension has precedence over the sending extension.
    Option Description
    0 No Off-Hook Signaling for incoming Intercom calls.
    1 [Default] Camp-On tones for incoming Intercom calls.
    2 Voice Over for incoming Intercom calls.