1104-01: System IP Address [System: Config: Communication: Ethernet (1104): IP Address]

Use this option to set the DSX system’s IP address. You must set the IP address if you intend to connect to the system’s ethernet port. There are two ways to connect:

• To the site’s local area network (LAN) using a standard CAT5 patch cord.
• Directly from your PC to the DSX ethernet port using a standard CAT5 crossover cable.

The IP address consists of four “octets” with three digits in each octet separated by a period. For example, a typical router default IP address is 192.168.1.1. (Leading zeros are not required if the octet is less than three digits.)

When connecting the DSX to the site’s local area network (LAN), the IP address you enter should be provided to you by the site network administrator. It is essential that the address not duplicate that of any other device connected to the network.

If you are connecting your PC to the system’s ethernet port using a standard crossover cable, the IP address 192.168.1.250 should be adequate. Set your PC IP address to 192.168.1.249.

Features Related to this Program

Telephone Features

• None

IntraMail Features

• None

Program Options

• Digits using 0-9, 12 max in the format xxx.xxx.xxx.xxx.
• With DHCP disabled in 1103-01: DHCP Enabled, the default is 0.0.0.0 (unassigned).