Caller ID Logging Programming Examples

Additional Feature Information
Caller ID Logging
Programming for this Feature
Programming Caller ID Logging System Options
Programming Caller ID Logging Extension Options
Programming Additional Caller ID Logging Options

How to Set Up Caller ID Logging: Two Examples

1. Enable Caller ID callbacks (return calls) for a system in area code 203.

  1. This example has no 10-digit local calling or other special requirements.

  2. In 3121-01: Caller ID Type [Lines: Config: Setup: Caller ID Setup (3121): Caller ID Type], for each line enter the type of Caller ID required: - (DSP = 1, ATRU-DB = 2, T1 ANI = 3).

  3. Set up the outbound route for Caller ID callbacks
    In 3711-01: Caller ID Callback Route Type [Lines: Caller ID: Setup: Route (3711): Type], select the type of route used for Caller ID call- backs (1 = line, 2 = Line Group).
    For line, in 3711-01: Caller ID Callback Line [Lines: Caller ID: Setup: Route (3711): Callback Line] enter the line number (1-64) the system will use for Caller ID callbacks.
    For Line Groups, in 3711-01: Caller ID Callback Group [Lines: Caller ID: Setup: Route (3711): Callback Group] enter the Line Group number (90- 98) the system will use for Caller ID callbacks.

  4. In 3712-02: 10-Digit Local Calls [Lines: Caller ID: Setup: Options (3712): 10 Digit Local Calls], enter 0 (No).

  5. In 3713-xx: Home Area Code Table Data [Lines: Caller ID: Home NPA: Codes (3713):, enter 203.
    The system will add a leading 1 to all calls to all area codes other than 203.
    Calls to area code 203 will be redialed as 7-digit calls.

2. Caller ID Callback requires 10-digit local calling and a "foreign" local exchange.

  1. Enable Caller ID callbacks (return calls) for a system in area code 203 where there is 10-digit local calling and a local exchange in adjacent area code 860.

  2. In 3121-01: Caller ID Type [Lines: Config: Setup: Caller ID Setup (3121): Caller ID Type], for each line enter the type of Caller ID required: - (DSP = 1, ATRU-DB = 2, T1 ANI = 3).

  3. Set up the outbound route for Caller ID callbacks
    In 3711-01: Caller ID Callback Route Type [Lines: Caller ID: Setup: Route (3711): Type], select the type of route used for Caller ID call- backs (1 = line, 2 = Line Group).
    For line, in 3711-01: Caller ID Callback Line [Lines: Caller ID: Setup: Route (3711): Callback Line] enter the line number (1-64) the system will use for Caller ID callbacks.
    For Line Groups, in 3711-01: Caller ID Callback Group [Lines: Caller ID: Setup: Route (3711): Callback Group] enter the Line Group number (90- 98) the system will use for Caller ID callbacks.

  4. In 3712-02: 10-Digit Local Calls [Lines: Caller ID: Setup: Options (3712): 10 Digit Local Calls], enter 1 (Yes).

  5. In 3713-xx: Home Area Code Table Data [Lines: Caller ID: Home NPA: Codes (3713):,enter 203.

  6. In 3714-xx: Home Area Code Exception List Table Data [Lines: Caller ID: HNPA Exceptions: Codes (3714)::
    Configure the table as a local table (L).
    Enter the local exchanges within area code 203.
    Calls within area code 203 that are found in the list are redialed as 10-digit local calls.
    Calls within area code 203 not found in the list are redialed as 1 + 10 digit toll calls.

  7. In 3715-xx: Foreign Area Code Exception List Table Data [Lines: Caller ID: Foreign NPA Locals: Codes (3715): 1-96] , enter the NPA + NXX combination for area code 860 that is a local call. The call is redialed as a 10-digit local call.